Choosing The Right Materials For Roof

If you are determining a new roof for a new or existing residence, the beauty, but also to know the material, weight, and method of installation. Whether you’re constructing from scrape or picking a replacement roof from the Roofing Contractors Grove OK for your current home, an assortment of materials are readily accessible and worth regarding. These contain asphalt, timber, and mixed shingles, as well as slate, clay, and concrete. Style is an important factor, but not the only one. Product cost, material weight, and method of installation should also influence your choice. More often than not, if you are doing a renovation, the roof of your existing home will determine your choice of roofing material. The fancy metal tiles are modern in style but also display aesthetic and elegant values.

This image has an empty alt attribute; its file name is 12Roofing-Grove-OK.jpg

Whatever your choice of the roof surface, you may need to install it. Flashing is an essential part of all exterior work, both on roof and siding. Flashing is a metal (aluminum or copper, sometimes tin) or plastic film. It is applied in strips to areas where different materials adjoin, such as the junction of the chimney and roof shingles, where the siding is adjacent to the window frame, and so on. A good flashing job is very important to maintain the watertight of the structure, as the most likely places for leakage are where different materials meet.

Regardless of the choice of roofing material, the coursing must be regular to the eye and parallel to the edge of the roof. From one line to another, the joints must be staggered to prevent leakage. Beware of contractors depending on tar for joints. Except with certain roofs where membranes are used, tar is a lazy method that should not be used for new roof surfaces. For most roofs, a material such as felt (tar paper) is rolled up before the shingles are nailed into place. However, with cedar shakes, long strips of furring (sometimes called “cedar breathers”) will be placed on the roof to allow the roof to breathe. In snowy areas, membranes called snow and ice shields may also be placed.

Leave a Reply

Your email address will not be published. Required fields are marked *